key features high precision - tolerances down to 0.05% low tcr - down to 5ppm/? stable high frequency performance operating temperature -55? to +155? increased power rating - up to 1.0w up to 200v dc operating voltage range of packaging options terminal finish - electroplated 100% matte sn applications communications instrumentation industrial controls medical characteristics - electrical the rp73 resistor series is a stable thin film chip resistor range offering increased power dissipation, higher temperature capabilities and increased working voltages compared to the standard rn73 series. the resistor is produced by sputtering a metal film onto high grade alumina and protecting with three complete printed layers. values are normally offered in e96 and e24 series. the rp73 resistor has accurate and uniform physical dimensions to reduce placement problems. 0402 0603 rated power @ 70c: 0.063w 0.1w resistance range (ohms) min: 49r9 49r9 49r9 49r9 49r9 49r9 10r 49r9 49r9 10r 24r9 4r7 24r9 4r7 4r7 24r9 4r7 4r7 max: 5k0 15k 100k 5k0 15k 70k 255k 5k0 15k 255k 15k 332k 15k 332k 1m0 15k 332k 1m0 tolerance (%): 0.05 0.1 0.5 / 1 0.05 0.1 0.5 / 1 code letter: a b d / f a b d / f selection series: e24 & e96 e24 & e96 temp. coefficient (ppm/c): 5 10 15 25 50 5 10 15 25 50 5 10 15 25 50 5 10 15 25 50 5 10 15 25 50 5 1015 25 50 code letter: acdfga c dfgacdfgacdfgacdfgacdfg limiting element voltage: 25v 75v max. overload voltage: 50v 150v operating temp. range: -55 to +155c -55 to +155c climatic category (c): 55/125/55 55/125/55 insulation resistance dry min: 1000m 1000m stability: 0.5% 0.5% 0805 1206 rated power @ 70c: 0.125w 0.25w resistance range (ohms) min: 24r9 4r7 24r9 4r7 4r7 24r9 4r7 4r7 1r0 24r9 4r7 max: 30k 511k 30k 511k 1m0 30k 511k 1m0 1m0 50k 1m0 tolerance (%): 0.05 0.1 0.5 / 1 0.05 / 0.1 / 0.5 / 1 code letter: a b d / f a / b / d / f selection series: e24 & e96 e24 & e96 temp. coefficient (ppm/c): 5 10 15 25 50 5 10 15 25 50 5 10 15 25 50 5 10 15 25 50 code letter: acdfg a cdfga c d fg a c d f g limiting element voltage: 150v 200v max. overload voltage: 300v 400v operating temp. range: -55 to +155c -55 to +155c climatic category (c): 55/125/55 55/125/55 insulation resistance dry min: 1000m 1000m stability: 0.5% 0.5% smd high power precision resistors type rp73 series 1773272 cis bi 06/2011 dimensions are in millimeters dimensions are shown for for email, phone or live chat, go to: te.com/help and inches unless otherwise reference purposes only. specified. values in brackets specifications subject are standard equivalents. to change.
-55 -40 -20 0 20 40 60 70 80 100 120 140 155 100 80 60 40 20 0 rated load (%) ambient temperature (c) for resistors operated in ambient temperatures above 70c, power rating must be derated in accordance with this curve. power derating curve characteristics - environmental item requirement test method tol. 0.05% tol. > 0.05% temperature coefficient as per tcrs specified in value range table on page 1 +25/-55/+25/+125/+25c of resistance (tcr): short time overload: r 0.05% r 0.2% rcwv* 2.5 or max. overload r 0.2% for high power rating voltage for 5 seconds insulation resistance: >1000m apply 100vdc for 1 minute r 0.05% r 0.2% 70 2c, max. working voltage endurance: >7k r 0.5% for 1000hrs with 1.5hrs r 0.5% for high power rating on and 0.5 hrs off damp heat with load: r 0.05% r 0.3% 40 2c, 90 - 95% r.h. max. working voltage r 0.5% for high power rating hrs with 1.5hrs on and 0.5hrs off bending strength: r 0.05% r 0.2% bending amplitude 3mm for 10 seconds solderability: 95% min. coverage 245 5c for 3 seconds resistance to soldering heat: r 0.05% r 0.2% 260 5c for 10 seconds dielectric withstand voltage: by type max. overload voltage for 1 minute thermal shock: r 0.05% r 0.25% -55c to +150c, 100 cycles low temperature operation: r 0.05% r 0.2% 1 hour, -65c, followed by 45 minutes of rcwv r 0.5% for high power rating reference standards: mil-std-202, jis-c 5201-1 storage temperature: 253c; humidity < 80%rh 1210 2010 2512 rated power @ 70c: 0.3w 0.3w 1w resistance range (ohms) min: 24r9 4r7 24r9 4r7 4r7 1r0 max: 50k 1m0 50k 1m0 100r 100r tolerance (%): 0.05 / 0.1 / 0.5 / 1 0.05 / 0.1 / 0.5 / 1 0.1 0.5 / 1 code letter: a / b / d / f a / b / d / f b d / f selection series: e24 & e96 e24 & e96 e24 & e96 temp. coefficient (ppm/c): 5 10 15 25 50 5 10 15 25 50 25 50 25 50 code letter: acdfgacdfgfgfg limiting element voltage: 200v 200v 200v max. overload voltage: 400v 400v 400v operating temp. range: -55 to +155c -55 to +155c -55 to +155c climatic category (c): 55/125/55 55/125/55 55/125/55 insulation resistance dry min: 1000m 1000m 1000m stability: 0.5% 0.5% 0.5% smd high power precision resistors type rp73 series 1773272 cis bi 06/2011 dimensions are in millimeters dimensions are shown for for email, phone or live chat, go to: te.com/help and inches unless otherwise reference purposes only. specified. values in brackets specifications subject are standard equivalents. to change.
case sizes 0603 e24 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 e24 3 digit marking - example: 101=100 102=1k code e96 code e96 code e96 code e96 01 100 25 178 49 316 73 562 02 102 26 182 50 324 74 576 03 105 27 187 51 332 75 590 04 107 28 191 52 340 76 604 05 110 29 196 53 348 77 619 06 113 30 200 54 357 78 634 07 115 31 205 55 365 79 649 08 118 32 210 56 374 80 665 09 121 33 215 57 383 81 681 10 124 34 221 58 392 82 698 11 127 35 226 59 402 83 715 12 130 36 232 60 412 84 732 13 133 37 237 61 422 85 750 14 137 38 243 62 432 86 768 15 140 39 249 63 442 87 787 16 143 40 255 64 453 88 806 17 147 41 261 65 464 89 825 18 150 42 267 66 475 90 845 19 154 43 274 67 487 91 866 20 158 44 280 68 499 92 887 21 162 45 287 69 511 93 909 22 165 46 294 70 523 94 931 23 169 47 301 71 536 95 953 24 174 48 309 72 549 96 976 code a b c d e f g h x y z multiplier 10 0 10 1 10 2 10 3 10 4 10 5 10 6 10 7 10 -1 10 -2 10 -3 0603 e96 marking code table e96 3 digit marking - examples: 14c=13k7 , 13c=13k3 , 68b=4k99 , 68x=49.9 dimensions part number l w t d c weight (g) 1000 pieces rp73 1e (0402) 1.00 0.05 0.50 0.05 0.30 0.05 0.20 0.10 0.20 0.10 0.54 rp73 1j (0603) 1.55 0.10 0.80 0.10 0.45 0.10 0.30 0.20 0.30 0.20 1.83 rp73 2a (0805) 2.00 0.15 1.25 0.15 0.55 0.10 0.30 0.20 0.40 0.25 4.71 rp73 2b (1206) 3.05 0.15 1.55 0.15 0.55 0.10 0.42 0.20 0.35 0.25 9.02 rp73 2e (1210) 3.10 0.15 2.40 0.15 0.55 0.10 0.40 0.20 0.55 0.25 10.00 rp73 2h (2010) 4.90 0.15 2.40 0.15 0.55 0.10 0.60 0.30 0.50 0.25 23.61 rp73 3a (2512) 6.30 0.15 3.10 0.15 0.55 0.10 0.60 0.30 0.50 0.25 38.08 l d w t c 1. alumina substrate 2. bottom electrode (ag) 3. top electrode (ag-pd) 4. edge electrode (nicr) 5. barrier layer (ni) 6. external electrode (sn) 7. resistor layer (nicr) 8. overcoat (epoxy) 9. marking marking codes - case sizes 0805 to 2512 resistance: 100 2.2k 10k 49.9k 100k marking code: 1000 2201 1002 4992 1003 iec 4 digit marking smd high power precision resistors type rp73 series 1773272 cis bi 06/2011 dimensions are in millimeters dimensions are shown for for email, phone or live chat, go to: te.com/help and inches unless otherwise reference purposes only. specified. values in brackets specifications subject are standard equivalents. to change. 14c
recommend land pattern type a b c rp73 1e (0402) 0.5 0.5 0.60 0.2 rp73 1j (0603) 0.8 1.0 0.90 0.2 rp73 2a (0805) 1.0 1.0 1.35 0.2 rp73 2b (1206) 2.0 1.15 1.70 0.2 rp73 2e (1210) 2.0 1.15 2.50 0.2 rp73 2h (2010) 3.6 1.4 2.50 0.2 rp73 3a (2512) 4.9 1.6 3.10 0.2 packaging quantity & reel specifications type ?a ?b ?c w t paper embossed tape (ea) plastic tape (ea) rp73 1e (0402) 178.0 1.0 60.0 +1.0 13.5 0.7 9.5 1.0 11.5 1.0 *250 / 1000 / 5000 - rp73 1j (0603) 178.0 1.0 60.0 +1.0 13.5 0.7 9.5 1.0 11.5 1.0 *250 / 1000 / 5000 - rp73 2a (0805) 178.0 1.0 60.0 +1.0 13.5 0.7 9.5 1.0 11.5 1.0 *250 / 1000 / 5000 - rp73 2b (1206) 178.0 1.0 60.0 +1.0 13.5 0.7 9.5 1.0 11.5 1.0 *250 / 1000 / 5000 - rp73 2e (1210) 178.0 1.0 60.0 +1.0 13.5 0.7 9.5 1.0 11.5 1.0 *250 / 1000 / 5000 - rp73 2h (2010) 178.0 1.0 60.0 +1.0 13.5 0.7 13.5 1.0 15.5 1.0 - 1000 / 4000 rp73 3a (2512) 178.0 1.0 60.0 +1.0 13.5 0.7 13.5 1.0 15.5 1.0 - 1000 / 4000 * 250 piece packs supplied in sealed bags of cut tape length smd high power precision resistors type rp73 series 1773272 cis bi 06/2011 dimensions are in millimeters dimensions are shown for for email, phone or live chat, go to: te.com/help and inches unless otherwise reference purposes only. specified. values in brackets specifications subject are standard equivalents. to change.
rp73 c 2a 1k0 b tg common part rp73 - smd precision high power, high temperature temp. coefficient a - 5ppm/c c - 10ppm/c d - 15ppm/c f - 25ppm/c g - 50ppm/c package size 1e - 0402 1j - 0603 2a - 0805 2b - 1206 2e - 1210 2h - 2010 3a - 2512 resistor value 100r (100 ohms) 1k0 (1000 ohms) 10k (10,000 ohms) 100k (100,000 ohms) 1m0 (1,000,000 ohms) tolerance a - 0.05% b - 0.1% d - 0.5% f - 1% packaging tg - cut tape (250 pcs) tdf - reel (1000 pcs) td - reel (5000 pcs) tdg - reel (250 pcs) te - reel (4000 pcs) 2h & 3a only how to order paper tape specification type a b w e f p 0 p 1 p 2 ?d 0 t rp73 1e (0402) 0.70 0.05 1.16 0.05 8.00 0.10 1.75 0.05 3.5 0.05 4.00 0.10 2.00 0.05 2.00 0.05 1.55 0.05 0.40 0.03 rp73 1j (0603) 1.10 0.05 1.90 0.05 8.00 0.10 1.75 0.05 3.5 0.05 4.00 0.10 4.00 0.10 2.00 0.05 1.55 0.05 0.60 0.03 rp73 2a (0805) 1.60 0.05 2.37 0.05 8.00 0.10 1.75 0.05 3.5 0.05 4.00 0.10 4.00 0.10 2.00 0.05 1.55 0.05 0.75 0.05 rp73 2b (1206) 2.00 0.05 3.55 0.05 8.00 0.10 1.75 0.05 3.5 0.05 4.00 0.10 4.00 0.10 2.00 0.05 1.55 0.05 0.75 0.05 rp73 2e (1210) 2.75 0.05 3.40 0.05 8.00 0.10 1.75 0.05 3.5 0.05 4.00 0.05 4.00 0.10 2.00 0.05 1.60 0.10 0.75 0.05 embossed plastic tape specifications type a b w e f p 0 p 1 p 2 ?d 0 t rp73 2h (2010) 2.85 0.10 5.45 0.10 12.0 0.10 1.75 0.10 5.5 0.05 4.00 0.05 4.00 0.10 2.00 0.05 1.50 +0.10 1.00 0.20 rp73 3a (2512) 3.40 0.10 6.65 0.10 12.0 0.10 1.75 0.10 5.5 0.05 4.00 0.05 4.00 0.10 2.00 0.05 1.50 +0.10 1.00 0.20 smd high power precision resistors type rp73 series te connectivity, te connectivity (logo) and te (logo) are trademarks. other logos, product and company names mentioned herein may be trademarks of their respective owners. while te has made every reasonable effort to ensure the accuracy of the information in this datasheet, te does not guarantee th at it is error-free, nor does te make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. te reserves the right to make any adjustments to the information contained herein at any time without notice. te expressly disclaims all implied warranties regarding the information contained herein, including , but not limited to, any implied warranties of merchantabili- ty or fitness for a particular purpose. the dimensions in this datasheet are for reference purposes only and are subject to cha nge without notice. specifications are subject to change without notice. consult te for the latest dimensions and design specifications.
|
